Skip to content

Republic Door Specializes in Embossed Panel Doors

July 24, 2012

Commercial Steel Door Performance with Decorative Panel Designs

Republic offers a wide variety of embossed panel insulated doors such as our traditional 6-panel design, 8′ 6-panel design with elongated panels, 2-panel colonial design, 4 panel, and 8 panel designs. Doors are only available in 18 and 20 gauge galvanealed (A60) steel. Face sheets are continuously projection welded to hinge and lock channels on 5″ centers. SDI Levels 2 and 3 – Physical performance level A

Features

  • 1¾” (44.4) design, rated for light to extra heavy-duty use
  • Polystyrene core (1 pound density) 100% bonded to skins to provide exceptional insulation, strength, and flatness
  • Hinge edge is non-beveled and reinforced with a full height 16 gauge steel channel projection welded at a maximum of 5″ on center with an additional 9 gauge reinforcement plate at each hinge location, providing more than 3/16″ (5) of total reinforcement
  • 16 gauge flush top and inverted bottom channels projection welded to both skins every 2½” on center
  • Lock edge is non-beveled and reinforced with a continuous 16 gauge channel, mortised and cylindrical lock reinforcements are integral 16 gauge reinforcements
  • Doors are prepared for 4½” standard or heavy weight, full mortise template hinges
  • Non-handed design (square lock edge)
  • Come standard with 1½ hour Mylar Underwriters Laboratories fire label
  • Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
  • Doors are individually packaged and fully plastic wrapped to prevent damage

Available Options

  • 14 gauge closer reinforcement (standard option)
  • 12 gauge closer reinforcement
  • Textured wood-grain (wood grain embossed are available as prime painted only – factory stain not available)
  • Continuously welded seamless design or filled seamless design
  • Lock edge beveled 1/8″ in 2″
  • Sizes available: Minimum 2′ 6″ x 6′ 8″, Maximum 3′ 8″ x 8′ 0″ (20 gauge available in 3070 or smaller only)(2′ 6″ available with special lock height, not ADA compliant)
  • 4″ hinges (square edge only)
  • Half glass light kits (limited sizes available)
  • Finish paint (Republic standard and custom colors)
Embossed Door Information

Comments are closed.