Atlantic Sales and Marketing will have three booths this year.
The 26th annual International Contemporary Furniture Fair (ICFF), North America’s platform for global design, will map the newest frontier of what’s best and what’s next at New York City’s Jacob K. Javits Convention Center, May 17-20, 2014.
The entire Atlantic Sales and Marketing sales force will be there with our manufacturers. It’s always nice to have your local rep introduce you to the people at the factory. Let us know when you’ll be walking the show so that we can arrange exclusive booth tours and find answers to the questions that are important to you.
The ICFF hosts more than 500 exhibitors from more than 30 countries in 11 categories from furniture to materials to kitchen and bath to fabricators. Register for free before May 13.
Atlantic Sales and Marketing will be representing three must-see manufactures at this year’s fair:
The XGT Series SPIRIT lockset from PDQ Industries, Inc., Leola, Pennsylvania.
Assembled in the U.S.A. with US and foreign made material. This product meets the requirements of the Buy American Act.
Features a lifetime manufacturer’s limited warranty
Certified to ANSI/BHMA A156.2-1996, Series 4000, Grade 1.
Windstorm Resistant Product Listed
Levers are solid cast, with no plastic inserts, minimum 5-1/2″ overall length with supportive spring power totally independent of chassis or latch unit.
Latchbolt are a minimum 9/16″ throw and requires only 41° rotation of levers for full retraction. Lockset fasteners are concealed with through-the-door throughbolt attachment outside the 2-1/8″ door prep, exceeds 3000 in lbs. of torque resistance
Tested to more than 4 Million cycles (more than 5 times the BHMA Grade 1 requirement) with virtually no lever sag.
Two new door levers have been launched by Turnstyle, to co-ordinate with the recent range of Tone cabinet handles, designed by Christina Roberts. Simple and bold, the designs are deliberately larger than normal door levers to make more of a statement whilst still working ergonomically.
The Panini is a soft square edged graduating block, finishing with a rounded concaved end. The grip is made from Turnstyles Composites and available in all eight finishes, this works off a square edged base and rose of brass. Available in a range of plated finishes. The Cone is a simple cone shape grip, with the convex end set on a barrel base and round rose, again composite grip and plated brass body and Rose. Simple, contemporary and a sure to be classics for the future.
Commercial Steel Door Performance with Decorative Panel Designs
Republic offers a wide variety of embossed panel insulated doors such as our traditional 6-panel design, 8′ 6-panel design with elongated panels, 2-panel colonial design, 4 panel, and 8 panel designs. Doors are only available in 18 and 20 gauge galvanealed (A60) steel. Face sheets are continuously projection welded to hinge and lock channels on 5″ centers. SDI Levels 2 and 3 – Physical performance level A
1¾” (44.4) design, rated for light to extra heavy-duty use
Polystyrene core (1 pound density) 100% bonded to skins to provide exceptional insulation, strength, and flatness
Hinge edge is non-beveled and reinforced with a full height 16 gauge steel channel projection welded at a maximum of 5″ on center with an additional 9 gauge reinforcement plate at each hinge location, providing more than 3/16″ (5) of total reinforcement
16 gauge flush top and inverted bottom channels projection welded to both skins every 2½” on center
Lock edge is non-beveled and reinforced with a continuous 16 gauge channel, mortised and cylindrical lock reinforcements are integral 16 gauge reinforcements
Doors are prepared for 4½” standard or heavy weight, full mortise template hinges
Non-handed design (square lock edge)
Come standard with 1½ hour Mylar Underwriters Laboratories fire label
Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
Doors are individually packaged and fully plastic wrapped to prevent damage
14 gauge closer reinforcement (standard option)
12 gauge closer reinforcement
Textured wood-grain (wood grain embossed are available as prime painted only – factory stain not available)
Continuously welded seamless design or filled seamless design
Lock edge beveled 1/8″ in 2″
Sizes available: Minimum 2′ 6″ x 6′ 8″, Maximum 3′ 8″ x 8′ 0″ (20 gauge available in 3070 or smaller only)(2′ 6″ available with special lock height, not ADA compliant)
4″ hinges (square edge only)
Half glass light kits (limited sizes available)
Finish paint (Republic standard and custom colors)
We are pleased to introduce to you the EGT Standalone (Offline) Cylindrical lock. The heart of the EGT is a proven ANSI/BHMA Grade 1 Cylindrical Chassis. Our engineers used this proven lock platform and created a product that is assembled in the USA, using electronics manufactured in the USA and programming that was developed by TellCard.
Some of the features of this product include:
Operates up to 130,000 lock/unlock cycles on one set of (4) AA batteries
Fully weather proof- both sides can be exposed to weather
7″ tablet PC optional for programming USB models coming soon. (optional accessory)
The current EGT Basic unit also features at no additional cost a key bypass feature that can be keyed to any of a number of keyways, small format (Best style) and large format Schlage® keyways.
The EGT also has:
Backlit Stainless Steel Keypad buttons with an audible sounder that aids operation in low light situations. The audible sounder also serves as a low battery indicator when current drops below a certain point, giving the user more than adequate time to change the batteries before they fail.
Easy programming that allows insertion of multiple codes in sequence without having to return to home.
Easy, field changeable handing.
Variety of lever styles
A Mortise Lock version called the EMR will be available Mid September again using a proven Grade 1 Mortise Lock Chassis. Features to be added include a USB connection for audit trails and programming as well as the next few months, an RFID version using Mifare technology will also be available. The EGT Basic is available now at an introductory price of 268.00 Net. Units are in stock and can ship almost immediately, so place your order now.